Omron F3SG-PGA-A User Manual page 377

8.
Securely tighten the Alignment Screws of the Top/Bottom Bracket and Adjustable Side-Mount Bracket
to fix the bracket to the sensor housing. The recommended torque to tighten the Alignment Screws is
3.0 N•m. (Fig. 10)
Securely tighten
Alignment Screw
(Top/Bottom Bracket)
Securely tighten
Alignment Screw
Securely tighten
Tightening screws with a torque that considerably exceeds the recommended torque may cause failure.
<Backside mounting>
Securely tighten
Alignment Screw
(Top/Bottom Bracket)
Securely tighten
Alignment Screw
(Top/Bottom Bracket)
Alignment Screw
Securely tighten
Alignment Screw
(Top/Bottom Bracket)
Fig. 9
Wiring and Installation
<Side mounting>
F3SG-SR/PG
User's Manual
E
347