Omron F3SG-PGA-A User Manual page 385

4.
When extending the cable length, connect a black Extended Plug-Socket Cable for Receiver and/or
Extended Socket-Straight Cable for Receiver (F39-JG-D, sold separately) to the receiver-side
Root-Plug Cable for Extended.
1. 1./3. 3.
Marking on the side (Emitter)
"EMITTER" mark
Root-Plug Cable for Extended for Emitter
Extended Plug-Socket Cable for Emitter
- No wiring is needed for the passive mirror of F3SG-PGA-C.
Connect the cable for the receiver with the emitter/receiver.
- For F3SG-SR-K, use the open-ended type.
M2.5 screw (Tightening torque: 0.35 N ・ m)
Root cable*
* The cable in the figure is a Root-Plug Cable for
Extended for Emitter. For connecting a Root-Plug
Cable for Extended for Receiver and Root-Straight
Cable for Emitter or Receiver, the same method
applies.
F39-JGR3K-L
2. 2.
†
F39-JG B-L
Marking on the side (Receiver)
"RECEIVER" mark
Root-Plug Cable for Extended for Receiver
F39-JGR3K-D
4. 4.
Extended Plug-Socket Cable for Receiver
†
F39-JG B-D
Wiring and Installation
F3SG-SR/PG
User's Manual
E
355