Omron F3SG-PGA-A User Manual page 461

Bluetooth ® Communication Unit
Appearance
Y-Joint Plug/Socket Connector
Appearance
Reset Switch Connector
Appearance
Connector Connected to Cable, Socket on One Cable End
Appearance
Muting Sensor
Appearance
Muting Sensor Arm Mounter (Two mounters per set, for emitter and receiver)
Appearance
* 2 sets are required when using Standard Muting Mode, and 1 set is required when using Exit-Only Muting Mode.
Model Application
F39-SGBT Mounted to the
Intelligent Tap to
connect with the SD
Manager 3 via
Bluetooth.
Model Application
F39-GCNY2 0.5 m
Model Application
F39-GCNY3 3 m
Model Application
XS5F-D421-C80-F 1 m
XS5F-D421-D80-F 2 m
XS5F-D421-E80-F 3 m
XS5F-D421-G80-F 5 m
XS5F-D421-J80-F 10 m
XS5F-D421-L80-F 20 m
Model Sensing method / output type
E3Z-T66A Through-beam/NPN output
E3Z-T86A Through-beam/PNP output
E3Z-R66 Retroreflective/NPN output
E3Z-R86 Retroreflective/PNP output
E39-R1S Retroreflective/Reflectors
Model
F39-FMA150T
F39-FMA400T
F39-FMA150R
F39-FMA400R
Remarks
Material: PBT resin (Body parts)
Remarks
M12 connectors
Used for reduced wiring.
Remarks
M12 connectors.
Used for reduced wiring when connecting
to a reset switch.
Remarks
M12 connector (4-pin), 4 wires.
Used to connect a reset switch connector
to a reset switch.
Sensing distance
10 m
10 m
2 m
2 m
2 m
Length Remarks
A through-beam muting sensor
150mm
can be mounted easily.
400mm
A retroreflective muting sensor
150mm
can be mounted easily.
400mm
Appendix
E
F3SG-SR/PG
431
User's Manual