Omron F3SG-PGA-A User Manual page 258

Setting with SD Manager 3
For operator and administrator levels, refer to 4-2-5. Logging In/Logging Out.
For the method to reflect the configuration data saved in the Intelligent Tap onto the sensor, refer to 3-6-3. Performing
Restoration.
For reading of the configuration data saved in the Intelligent Tap, refer to 4-2-7-1. Reading Configuration from Intelligent
Tap.
When connecting the Intelligent Tap to a F3SG-SR/PG and trying to return the F3SG-SR/PG to [Detecting], follow step 4
of 4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR/PG and Intelligent Tap, or click
the [Monitor]
 Writing Configuration File Saved in PC into Intelligent Tap
Check that the Intelligent Tap is correctly connected and log in with the administrator level.
By selecting the [Open] button
button
an arbitrary location.
Click the [Write] button
 F3SG-SR/PG Not Connected:
Configuration data can be written to the Intelligent Tap.
To write the configuration data written to the Intelligent Tap to the F3SG-SR/PG, refer to 3-6-3.
Performing Restoration to perform restoration.
 F3SG-SR/PG Connected:
Configuration data can be written to the Intelligent Tap and F3SG-SR/PG.
For operator and administrator levels, refer to 4-2-5-1. Logging In.
For the target sensor in the cascaded configuration of the F3SG-SR, refer to 4-2-3-2. Description on Top Page and Each
Button.
For reading of the configuration file saved in the PC, refer to 4-2-4-2. Reading Configuration from PC.
When connecting the Intelligent Tap to a F3SG-SR/PG and trying to return the F3SG-SR/PG to [Detecting], follow step 4
of 4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR/PG and Intelligent Tap, or click
the [Monitor]
F3SG-SR/PG
228
User's Manual
button.
directly from the tool menu, and select the configuration file (with extension sdm3) saved in
to write the configuration.
button.
from the [Main] menu on the tool bar or clicking the [Open]