Omron F3SG-PGA-A User Manual page 296

Setting with SD Manager 3
 Readout Information
The user can view the following information related to a receiver or emitter.
If more than one sensor is cascaded in series, information on all the cascaded sensors is viewed
together.
External wiring
Sensor
Operating Status
F3SG-SR/PG
266
User's Manual
Information
Power Supply
OSSD 1 (Black)
OSSD 2 (White)
RESET (Yellow)
AUX (Red)
MUTE A (Gray)
MUTE B (Pink)
Scan code
EDM
Interlock/Pre-Reset/PSDI
DIP Switch Enabled/Disabled
Fixed/Floating Blanking
PNP/NPN
Muting information
Override information
Sequence error information
Safety output information
Push-SW information
Blanking beam unblocked
information
Description
The power supply voltage in the power-on status is displayed.
Linked with safety output 1
Linked with safety output 2
Linked with Reset/EDM/Override input
Linked with auxiliary output
Linked with MUTE A/Pre-Reset input/PSDI input
Linked with MUTE B input
Displays Scan Code configured
Displays EDM configuration
Displays Interlock/Pre-Reset/PSDI mode configured
Displays whether the settings of the DIP Switch of the Intelligent
Tap is enabled or disabled.
Displays Fixed/Floating Blanking configured
Displays output mode (PNP/NPN) configured
Linked with muting status
Linked with override status
Linked with muting sequence error status or interlock sequence
error status
Linked with safety output
Linked with the input signal of Push Switch
Linked with the state where the blanking beam is unblocked