Omron F3SG-PGA-A User Manual page 13

Settings
Make sure the Responsible Person tests the operation of the F3SG-SR/PG after setting with the
DIP Switch on the F39-SGIT-IL3, Teach-in, SD Manager 3 or End Cap to verify that the F3SG-
SR/PG operates as intended. Make sure to stop the machine until the test is complete.
Unintended settings may cause a person to go undetected, resulting in serious injury.
When performing the Backup, make sure to set the DIP Switch Position 1 at OFF (Unlock) before
turning on the power. If the DIP Switch Position 1 is at ON (Lock), the Restoration is performed,
which may case the settings of the F3SG-SR/PG to be overwritten and a person to go
undetected, resulting in serious injury.
When performing the Restoration, make sure to set the DIP Switch Position 1 at ON (Lock)
before turning on the power. If the DIP Switch Position 1 at OFF (Unlock), the Backup is
performed, which may cause the settings of the F39-SGIT-IL3 to be overwritten and a person to
go undetected, resulting in serious injury.
When the Restoration is performed, if the DIP Switch Position 2 is at ON (DIP Switch Enabled)
and settings of the DIP Switch Positions 3 to 8 are different from the backup data in the F39-
SGIT-IL3, the settings in the DIP Switch takes priority and are saved in the F3SG-SR/PG. To
prevent such an accident, it is recommended that you set the DIP Switch Position 2 at OFF
before performing the Restoration when you use the settings backed up from the F3SG-SR/PG
or make settings with the SD Manager 3.
When pairing your device with the F39-SGBT Bluetooth ® Communication Unit, make sure that
the model name and serial number of the sensor to be configured match the information on your
device.
Do not use the F39-SGBT Bluetooth ® Communication Unit in close proximity to medical
equipment such as a pacemaker. Radio wave may affect the operation of such equipment.
Other
Perform daily and 6-month inspections for all F3SG-SR/PG as described in Chapter 7 Checklists.
When using the F3SG-SR/PG in cascade connection, perform inspections for every connected
F3SG-SR/PG. Otherwise, the system may fail to work properly, resulting in serious injury.
Do not try to disassemble, repair, or modify the product. Doing so may cause the safety functions
to stop working properly.
Do not use the product in environments where flammable or explosive gases are present. Doing
so may result in explosion.
Do not use the F3SG-SR in environments where strong electromagnetic field may be produced.
Doing so may cause the safety functions to stop working properly.
E
F3SG-SR/PG
xi
User's Manual