Omron F3SG-PGA-A User Manual page 372

Wiring and Installation
6.
Securely tighten screws to fix the Top/Bottom Bracket to the mounting position of the wall surface. (Fig.7)
<Backside mounting>
M8
Screws to mount the brackets to the wall are not included.
7.
Securely tighten the Alignment Screw of the Top/Bottom Bracket to fix the bracket to the sensor
housing. The recommended torque to tighten the Alignment Screw is 3.0 N•m. (Fig. 8)
Securely tighten
Alignment Screw
(Top/Bottom Bracket)
Securely tighten
Alignment Screw
(Top/Bottom Bracket)
Tightening screws with a torque that considerably exceeds the recommended torque may cause failure.
F3SG-SR/PG
342
User's Manual
Using one M8 screw
<Side mounting>
M8
<Backside mounting>
Fig. 8
Using two M5 or M6 screws
<Backside mounting>
M5/M6 M5/M6
Fig. 7
<Side mounting>
Securely tighten
Alignment Screw
(Top/Bottom Bracket)
Securely tighten
Alignment Screw
(Top/Bottom Bracket)
<Side mounting>