Omron F3SG-PGA-A User Manual page 465

Control Unit
Appearance
Control Unit
Appearance
Control Unit
Appearance
Model
G9SA-301-P Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Model
G9SB-301-B Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Auto reset
G9SB-301-D Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Manual reset
G9SB-200-B Safety output (relay): NO
contact x 2
Auto reset
G9SB-200-D Safety output (relay): NO
contact x 2
Manual reset
Model
G9SX-AD322-T15 Safety output (solid-state):
source output (PNP) x 3
(instantaneous), source output
(PNP) x 2 (OFF-delayed)
Auxiliary output (solid-state):
source output (PNP) x 2
Output
• An F39-JGC Root-Straight
Cable or the combination of an
F39-JGR3K Root-Plug Cable for
Extended and an F39-JGA
Single-Ended Cable is required.
• An F3SG-SR/PG in NPN system
can be connected.
Output
• An F39-JGC Root-Straight
Cable or the combination of an
F39-JGR3K Root-Plug Cable for
Extended and an F39-JGA
Single-Ended Cable is required.
• An F3SG-SR/PG in PNP system
can be connected.
Output
• An F39-JGC Root-Straight
Cable or the combination of an
F39-JGR3K Root-Plug Cable for
Extended and an F39-JGA
Single-Ended Cable is required.
• An F3SG-SR/PG in PNP system
can be connected.
• 16 patterns of OFF-delayed
output for up to 15 s can be set.
• The OFF-delayed output can be
used as instantaneous output by
setting it to 0 s.
• Can be configured for partial
control and total control.
• Can be extended to connect a
relay unit.
Appendix
Remarks
Remarks
Remarks
F3SG-SR/PG
435
User's Manual
E