Omron F3SG-PGA-A User Manual page 462

Appendix
Muting Sensor Arm Mounter Bracket for SLC
Appearance
Muting Sensor Connector Box
Appearance
Laser Alignment Kit
Appearance
F3SG-SR/PG
432
User's Manual
Model
For emitter and receiver, one piece each or one set each
F39-LMAF1
Common use for F3SG-SR/PG
* The muting sensor stand bracket (F39-LMAF1) cannot be used
for the F3SG-SR/PG with a product length smaller than 280 mm.
Model
F39-GCN5
XS3W-M42C-4C2-A
XS3W-M421-401-R
XS3W-M421-402-R
XS3W-M421-405-R
XS3W-M421-410-R
XS3W-M424-402-R
XS3W-M424-405-R
Model Application
F39-PTG You can attach this to
F3SG-SR/PG. The laser
light assists coarse beam
alignment.
Remarks
Application Remarks
Main unit: M12 connector (5-pin)
0.5 m
x 7, M12 connector (8-pin) x 1
Cable: M12 connector (8-pin) x 1
Man-hours to wire the muting
sensor can be reduced.
M8 connector/M12 Plug-Socket
0.2 m
Cable (4-pin)
Connection cable between the
muting sensor (E3Z) and muting
sensor connector box (F39-
GCN5)
1 m M8 connector/M8 plug socket
cable (4-pin) straight type
If you need more than 0.5m
2 m
between the muting sensor
(E3Z) and muting sensor
5 m
connector box (F39GCN), use
XS3W-M42C-4C2-A to extend
10 m
the cable.
2 m M8 connector (L type)/M8 plug
socket (straight type) cable (4-
pin)
If the connector block gap of the
5 m
muting sensor (E3Z) is from 40
to 80 mm, use XS3W-M42C-
4C2-A in combination.
Remarks
Red semiconductor laser
(wavelength 650 nm, 1 mW max., JIS
Class 2, IEC Class 2, FDA Class II)