Omron F3SG-PGA-A User Manual page 338

Wiring and Installation
 Side Mounting
Adjustable Top/Bottom
Bracket (F39-LSGTB-SJ)
Adjustable Side-Mount
Bracket (F39-LSGA)
Adjustable Top/Bottom
Bracket (F39-LSGTB-SJ)
4-digit number of the type name (Protective height: )
Dimension C
Dimension D
Dimension G
Dimension H
Dimension I
Dimension N1
Dimension N2
Dimension P
*1. Adjustable Side-Mount Bracket: M5 or M6
*2. For the model of protective height of 0160, the numbers corresponding to dimensions N1 and N2 are 20 to 30.
*3. The number of brackets required to mount either one of emitter and receiver.
5-3-4-4. Mounting with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Adjustable Side-
Mount Brackets (Intermediate Brackets) (F39-LSGA)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- The Adjustable Top/Bottom Bracket and Adjustable Side-Mount Bracket allow beam alignment after fixing the bracket to
a wall surface. The angle adjustment range of the Adjustable Top/Bottom Brackets is ±22.5°. The angle adjustment
range of the Adjustable Side-Mount Brackets is ±15°.
F3SG-SR/PG
308
User's Manual
50
38
19
1.7
4.2 4.2
10
F3SG-SR-14
F3SG-SR25
F3SG-SR-45
F3SG-SR-85
C+27.2+N1+N2
C+38+N1+N2
C+58+N1+N2
0 to 30 *2
0 to 30 *2
F3SG-SR-14
F3SG-SR-25
F3SG-SR-45
F3SG-SR-85
3.2
32
Top/Bottom Bracket: M5 *1>
46.7
C-20
C-40
Protective height
(Dimension C)
10
20 0160 to 0840
40 0880 to1680
80 1760 to 2480
19
2-M8
4-M5
2-M5 2-M5
or M6 or M6
4.2
4.2
19
<Screw for Adjustable
<Screw for Adjustable
Top/Bottom Bracket: M8 *1>
[ Unit : mm ]
Number of
Number of
Adjustable
Intermediate Dimension F
Top/Bottom
Bracket *3
Bracket *3
2 0
2 1 1000 mm max.
2 2 1000 mm max.
-