Appendix
<Indicator status at lockout: Emitter>
Combination of indicators and error description
ERR indicator
E
or
ERR
Blinking once
E
or
ERR
Illminated
*1. For F3SG-SRA and F3SG-PGA-A/-L, the Area Beam Indicator closer to the "TOP" mark on the
F3SG-SR/PG blinks.
*2. For F3SG-SRA and F3SG-PGA-A/-L, the Area Beam Indicator closer to the "BTM" mark on the
F3SG-SR/PG blinks.
*3. May be turned ON or blink depending on the sensor's state.
*4. If the sensor is F3SG-SR or F3SG-PGA-L/-A, some other connected sensor is in lockout state.
Check the other connected sensors to confirm the combination of the indicators of the sensor
whose ERR indicator is blinking. For F3SG-PGA-C, use SD Manager 3 to confirm the error code.
F3SG-SR/PG
414
User's Manual
Other indicators
Error description
L
Operating range selection setting error
or
LONG
Cap error
TOP
Other sensor error
*1
BTM
DIP Switch setting error
*2
Communication error
Error other than those above
Lockout of some other sensor is
*3
detected.*4