Omron F3SG-PGA-A User Manual page 463

Test Rod
Appearance
To check operation before use, purchase and use the test rod.
Spatter Protection Cover (Two cables per set, one for emitter and one for receiver)
Appearance
Lamp
Appearance
Floor Mounting Column
Appearance
* When using the floor-standing stand, the intermediate fitting of F3SG-SR/PG is not required.
Model
F39-TRD14
F39-TRD25
F39-TRD30
Model
F39-HSG Two pieces per set, common for emitter/receiver.
For the F3SG-R of the protective height of 2,000 mm or longer,
use two Spatter Protection Covers of different lengths.
Please note the following:
• The operating range of the F3SG-SR attached with the Spatter
Protection Cover is 10% shorter than the rating.
Material: PC resin (Transparent cover), ABS resin (Side wall)
Model
Attached to the emitter, receiver, or emitter/receiver and shows the
F39-SGLP
operating state of F3SG-SR/PG by the indicator state.
Model
F39-ST0990
F39-ST1310
F39-ST1630
F39-ST1950
F39-ST2270
Diameter
14 mm dia.
25 mm dia.
30 mm dia.
Remarks
Remarks
Column Height Remarks
Sensors with a product length of
990mm
880 mm or less can be mounted.
1,310mm Sensors with a product length of
1,220 mm or less can be
mounted.
Sensors with a product length of
1,630mm
1,520 mm or less can be
mounted.
1,950mm
Sensors with a product length of
1,840 mm or less can be
mounted.
2,270mm Sensors with a product length of
2,080 mm or less can be
mounted.
Appendix
E
F3SG-SR/PG
433
User's Manual