Juniper ACX500 Hardware Manual page 123

Figure 31: Antenna Clearance Requirement—Field of View
Tools and Parts Required to Install the GNSS Antenna
Table 32 on page 114 lists the parts of a standard GNSS antenna kit and other items required to install
the GNSS antenna.
Table 32: Standard Antenna Parts, Tools, and Other Required Items
Item
GNSS L1/G1 antenna with a frequency band of 1575 to 1610 MHz +/-10 MHz, 3 dB bandwidth
Antenna mount that is used to secure the GNSS antenna
Antenna specific base adaptor
Antenna stanchion or mast
Antenna-specific cable connector
Cable continuity tester
114