Juniper ACX500 Hardware Manual page 139

CAUTION: If you are mounting multiple units on a rack, mount the heaviest unit at the
bottom of the rack, and mount the other units from the bottom of the rack to the top in
decreasing order of the weight of the units.
To install the router in the rack:
1. Install both mounting brackets to either the front or rear of the chassis:
a. Align the bracket with the two sets of mounting holes.
b. Insert the four screws at the top and bottom of the bracket, and tighten each partially.
c. Tighten the four screws completely.
d. Repeat the procedure for the other bracket.
Figure 33: Installing the Mounting Brackets to the Front of the ACX500 Router
Figure 34: Installing the Mounting Brackets to the Rear of the ACX500 Router
2. Ensure that the rack is in its permanent location and is secured to the building. Ensure that the
installation site allows adequate clearance for both airflow and maintenance.
3. Position the router in front of the rack or cabinet.
130