Juniper ACX500 Hardware Manual page 94

• Ensure that the wall or the pole onto which the router is installed is stable and securely supported.
• Ensure that the wall or pole is able to carry the load of the fully configured router.
• If you are mounting the router in wallboard with a gypsum plaster core or in wallboard not backed by
wall studs, use hollow wall anchors capable of supporting the combined weight of two fully loaded
chassis. Insert the screws into wall studs wherever possible to provide added support for the chassis.
• The width of the pole must be within the range of 2 in. through 16 in. for the pole-mounting brackets
to fit properly.
• To mount the router, use the pole-mounting kit or the wall-mounting kit from Juniper Networks.
• One person must be available to lift the router while another secures the router.
85