Juniper ACX500 Hardware Manual page 177

One end of the AC power cord for the ACX500 outdoor router has the AC power plug (see
61 on page 169) that connects to the router, and the other end has three power cord wires (see
Figure 60 on page 168) that are connected to the power source.
Figure 60: AC Power Cord Wires That Connect to the Power Source
Power lug
1
—
Label (G, N and L)
2
—
WARNING: Ensure that the line (L), neutral (N), and ground (G) AC power cord
wires are correctly connected to the respective branch circuit or power source that
powers the ACX500 outdoor router. Failing to do so might result in damaging the
router. The AC power cord has L, N, and G labels for reference and correct
connection to AC mains terminals.
Cord wire
3
—
AC power cord
4
—
168
Figure