Juniper ACX500 Hardware Manual page 16

Figure 1: ACX500 Indoor Router Interface Port Mapping—DC and AC Chassis
1 FPC 0, PIC 0: 0/0/0–0/0/1 (2x1GE SFP)
—
2 FPC 0, PIC 1: 0/1/0–0/1/3 (4x1GE SFP)
—
ACX500 Outdoor Routers Hardware and CLI Terminology Mapping
Table 2 on page 7 describes the hardware terms used in ACX500 outdoor router documentation and
the corresponding terms used in the Junos OS CLI.
interfaces.
Table 2: CLI Equivalents of Terms Used in Documentation for ACX500 Outdoor Routers
Hardware Description (as
Item (as Displayed in the
Displayed in CLI)
the CLI)
Chassis ACX500
3 FPC 0, PIC 1: 0/1/0 PoE++, 0/1/1 PoE+,
—
0/1/2 PoE+, and 0/1/3 (4x1GE RJ-45)
Figure 2 on page 9
Value (as Item in Documentation
Displayed in the
CLI)
– Router chassis
shows the port locations of the
Additional Information
"Chassis Physical
Specifications for
ACX500 Routers" on
page 87
7