Juniper ACX500 Hardware Manual page 152

NOTE: The ACX500 outdoor router do not power on if the interface and the management port
chambers are open. Ensure that the interface and the management port chambers are closed
before you power on the router. This is an IP65 requirement for weatherproofing the router.
Figure 10 shows the ACX500 outdoor router along with the weatherproofing caps, also called weather
seal caps. The figure also shows the weatherproofing port covers, also called weather seal covers,
protecting the interface and management port components from external environment.
Figure 42: Interface Port and Cable Inlet Cover
1 Interface port chamber with weather seal
—
cover
Cable connector ports with weather seal cap
2
—
To know which components are housed inside the interface and the management port covers, see
Panel of an ACX500 Outdoor Router.
3 Management port chamber with weather
—
seal cover
Power port with weather seal cap
4
—
143
Front