Leds On Acx500 Routers - Juniper ACX500 Hardware Manual

Figure 19 on page 59 shows an example of a wiring diagram for a simple input alarm-reporting device.
In this case the push button switch is an alarm sensor that triggers an input alarm when a door-open
condition occurs.
Figure 19: Sample Input Alarm-Reporting Device
SEE ALSO
Alarm Contact Port on ACX500 Routers | 57

LEDs on ACX500 Routers

IN THIS SECTION
System LED on the Front Panel | 60
Gigabit Ethernet SFP and RJ-45 Port LEDs | 60
Management Port LEDs on the Front Panel | 61
GPS 1 PPS LED on the Front Panel | 61
59