Juniper ACX500 Hardware Manual page 147

NOTE: The information provided in this topic is applicable for both the ACX500 outdoor router
variants—ACX500 outdoor router and ACX500 outdoor router with PoE.
To mount the ACX500 outdoor router on a pole:
1. Attach an ESD grounding strap to your bare wrist, and connect the strap to one of the ESD points
on the chassis.
2. Align and attach the chassis-mounting bracket and the pole-mounting bracket provided with the
pole-mounting kit, and secure the two brackets with the set of four bracket screws, washers, and
nuts. See Figure 39 on page
NOTE: Apply between 50 lb-in. (5.7 Nm) and 60 lb-in. (6.8 Nm) of torque on the screws to
ensure that both the brackets are held tightly.
Figure 39: Pole-Mounting Kit
Screw
1
—
Split washer
2
—
Chassis-mounting bracket
3
—
138.
5
6
7
Pole-mounting bracket
—
Pole-mounting straps
—
Flat washer
—
138