Juniper ACX500 Hardware Manual page 261

• IEEE 1613 Environmental and Testing Requirements for Communications Networking Devices in
Electric Power Substations
• GR-3108 Generic Requirements for Network Equipment in the Outside Plant (OSP)
• GR-487 General Requirements for Electronic Equipment Cabinet
• GR-3171 Class 3
• Generic Requirements for Electronic Equipment Cabinets
• AT&T TP-76200 Issue 16 (2011) Network Equipment Power, Grounding, Environmental, and Physical
Design Requirements
• Verizon TPR.9305 Issue 4 (2011) Verizon NEBS Compliance: NEBS Compliance Clarification
Document
• Deutsche Telekom 1TR9 (2008) EMC Specification
• British Telecom EMC Immunity Requirements (2007)
• IBM C-S 2-0001-005 ESD
• IBM C-S 2-0001-012 Radio Frequency Electromagnetic Susceptibility
• ITU-T K.21 (2011) Resistibility of telecommunication equipment installed in customer premises to
over voltages and over currents
• ITU-T K.20 (2011) Resistibility of telecommunication equipment installed in telecom centers to over
voltages and over currents
• Juniper Inductive GND (JIG)
• ITU-T G.813: Timing characteristics of SDH equipment client clocks (SEC)
• ITU-T G.703 clause 5: Physical/electrical characteristics of hierarchical digital interfaces
• ITU-T G.703 clause 9: Physical/electrical characteristics of hierarchical digital interfaces
• ITU-T G.781: Synchronization layer functions
• ITU-T G.8261/Y.1361: Timing and synchronization aspects in packet networks
• ITU-T G.8262: Timing characteristics of Synchronous Ethernet equipment client clock
• ITU-T G.8263: Timing characteristics of packet-based equipment clocks
• ITU-T G.8264: Distribution of timing information through packet networks
• ITU-T G.8265.1/8265.2: Architecture and requirements for packet-based frequency delivery
252