Juniper ACX500 Hardware Manual page 130

Table 34: Trimble Bullet 38dB GPS L1 Antenna Specifications
Parameter
Dimensions
Weight
Connector
Mounting
Table 35 on page 121 lists the specifications of the cable to be used with the Trimble GPS antenna.
Table 35: Antenna Cable Specification for Trimble Bullet 38dB GPS L1 Antenna
Antenna
Trimble Bullet 38dB GPS L1 Antenna 3V (38dB
gain)
NOTE: Do not use coaxial cable type RG-58 for GNSS antenna. Use coaxial cable type RG-6 or
the cables mentioned in
SEE ALSO
Prevention of Electrostatic Discharge Damage | 236
Requirements and Specifications for the Recommended GNSS Antenna
Specification
3.05 in. (77.5 mm) deep × 2.61 in. (66.2 mm)high
0.44 lb (0.2 kg)
TNC (3.3 VDC)
3/4 in. pipe thread or 1–14 in. thread
Coaxial Cable Type
LMR-240 (RG-213)
LMR400
Table 35 on page 121.
(Continued)
Maximum Length
150 feet (50 meters)
300 feet (100 meters)
121
Loss Budget
10 dB/100 feet
5.2 dB/100 feet