Table 25: Cabinet Requirements and Specifications for the ACX500 Indoor Router
Cabinet Requirement
Cabinet size
Cabinet clearance
Guidelines
•
You can mount the router in a cabinet that
contains a 19-in. (48.3 cm) rack as defined in
Cabinets, Racks, Panels, and Associated Equipment
(document number EIA-310–D) published by the
Electronics Industry Association
www.eia.org).
NOTE: The cabinet must meet the strength
requirements to support the weight of the router.
•
The minimum cabinet size must be able to
accommodate the maximum external dimensions
of the router.
•
The outer edges of the mounting brackets extend
the width of the chassis to 19 in. (48.3 cm).
•
The minimum total clearance inside the cabinet is
30 in. (76.2 cm) between the inside of the front
door and the inside of the rear door.
(http:/ /
96