Juniper ACX500 Hardware Manual page 182

Figure 63 on page 173
Figure 63: ACX500 Outdoor Router DC Power Cord
Positive (+) power terminal
1
—
Negative (–) power terminal
2
—
Positive (+) power terminal
3
—
The latch on the DC power cord plug allows only one way insertion of the power cord plug into the
router.
5. Insert the DC power cord plug to the power terminal on the router. Ensure that the power plug sits
tight. See Figure 64 on page
Figure 64: Connecting DC Power to the Router
NOTE: A DC-powered router needs to be connected with the outdoor DC power cord that is
purchased from Juniper Networks, and which is compatible with the ACX500 outdoor router.
To supply sufficient power, the DC input wiring on the facility DC source is capable of
supplying at least 5 A @–48 VDC per input for each power supply. We recommend that the
shows the DC power cord.
173.
Negative (–) power terminal
4
—
Latch
5
—
173