Juniper ACX500 Hardware Manual page 90

• Ensure minimum 1 meter/second airflow in any direction.
Figure 22: ACX500 Indoor Router Chassis Dimensions and Clearance Requirements
ACX500 Outdoor Router Chassis Dimensions and Clearance Requirements
Prepare your site for installation by observing the following guidelines:
• When installing the ACX500 outdoor routers on a pole or on a wall, the chassis must be installed in a
vertical orientation with the cables pointing downward and the eye bolt for hoisting the router
pointing upward.
Figure 23 on page 83
router after installation.
• When choosing a location, allow at least 6 in. (15.2 cm) of clearance between the sides of the chassis
(with the router in installed position) and adjacent equipment or walls. See
• Ensure that the wall or the pole onto which the router is installed is stable and securely supported.
• Ensure that the wall or pole is able to carry the load of the fully configured router.
and Figure 24 on page 84 show the orientation of the ACX500 outdoor
Figure 23 on page 83.
81