Replacing an MX480 AS MSC
Copyright © 2019, Juniper Networks, Inc.
Figure 131: Installing an AS MLC
Removing an MX480 AS MSC on page 311
1.
2.
Installing an MX480 AS MSC on page 312
Removing an MX480 AS MSC
AS MSCs are hot-insertable and hot-removable. When you remove an AS MSC, the router
continues to function.
The AS MSCs are located in the AS MLCs installed in the front of the router. An AS MSC
weighs 1.4 lb (0.6 kg).
To remove an AS MSC (see
Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the AS
1.
MSC.
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
2.
ESD points on the chassis.
Use one of the following methods to take the AS MSC offline:
3.
Press its online/offline button. Use a narrow-ended tool that fits inside the opening
that leads to the button. Press and hold the button until the AS MSC LED goes out
(about 5 seconds).
Issue the following CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot offline
For more information about the command, see the
SC B
SC B
Figure 132 on page
312):
Chapter 4: Maintaining Components
M X4 80
CLI Explorer
.
311