Maintaining Cables That Connect To Mx480 Dpcs, Mpcs, Mics, Or Pics; Figure 135: Installing An As Mxc - Juniper MX480 Hardware Manual

MX480 Universal Routing Platform Hardware Guide

Maintaining Cables That Connect to MX480 DPCs, MPCs, MICs, or PICs

Purpose
Action
316
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see the
The normal functioning status LED confirms that the AS MXC is online. You can also
verify correct AS MXC functioning by issuing the

Figure 135: Installing an AS MXC

For optimum router performance, verify the condition of the cables that connect to the
DPCs, MPCs, MICs, or PICs.
On a regular basis:
Use the cable management brackets to support cables and prevent cables from
dislodging or developing stress points.
Place excess cable out of the way in the cable management brackets. Do not allow
fastened loops of cable to dangle from the connector or cable management brackets,
because this stresses the cable at the fastening point. Putting fasteners on the loops
helps to maintain their shape.
.
CLI Explorer
show chassis fpc pic-status
Copyright © 2019, Juniper Networks, Inc.
command.