Maintaining Mx480 Pics; Figure 127: Installing An Mpc - Juniper MX480 Hardware Manual

MX480 Universal Routing Platform Hardware Guide
See Also

Maintaining MX480 PICs

Purpose
Action
302
CAUTION: After the
before removing the MPC again, removing an MPC from a different slot,
or inserting an MPC in a different slot.
You can also verify correct MPC and MIC functioning by issuing the
show chassis fpc pic-status
page 295 and "Maintaining MX480 MICs" on page

Figure 127: Installing an MPC

SC B
SC B
MX480 Modular Port Concentrator (MPC) Description on page 124
For optimum router performance, verify the condition of the PICs.
On a regular basis:
Check the LEDs on PIC faceplates. The meaning of the LED states differs for various
PICs. For more information, see the
houses the PIC detects a PIC failure, the FPC generates an alarm message to be sent
to the Routing Engine.
Issue the CLI
show chassis fpc pic-status
numbered from 0 through
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
LED lights steadily, wait at least 30 seconds
OK/FAIL
commands described in"Maintaining MX480 MPCs" on
288.
MX 48 0
MX Series Interface Module Reference
command. The PIC slots in an FPC are
1 , left to right:
DPC 40x 1GE R
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
show chassis fpc
. If the FPC that
Copyright © 2019, Juniper Networks, Inc.
and