Ac Power Cord Specifications For The Mx480 Router; Table 16: Ac Power Cord Specifications - Juniper MX480 Hardware Manual

AC Power Cord Specifications for the MX480 Router

Table 16: AC Power Cord Specifications

Country
Australia
China
Europe (except Denmark, Italy, Switzerland,
and United Kingdom)
Italy
Japan
North America
United Kingdom
Copyright © 2019, Juniper Networks, Inc.
Each AC power supply has a single AC appliance inlet located on the power supply that
requires a dedicated AC power feed. Most sites distribute power through a main conduit
that leads to frame-mounted power distribution panels, one of which can be located at
the top of the rack that houses the router. An AC power cord connects each power supply
to the power distribution panel.
You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that
supply AC power to the router. The C19 appliance coupler at the female end of the cord
inserts into the AC appliance inlet coupler, type C20 (right angle) as described by
International Electrotechnical Commission (IEC) standard 60320. The plug at the male
end of the power cord fits into the power source receptacle that is standard for your
geographical location.
Table 16 on page 49 provides specifications and
the AC power cord provided for each country or region.
Model Number
CBL-M-PWR-RA-AU
CBL-M-PWR-RA-CH
CBL-M-PWR-RA-EU
CBL-M-PWR-RA-IT
CBL-PWR-RA-JP15
CBL-M-PWR-RA-JP
CBL-PWR-RA-US15
CBL-PWR-RA-TWLK-US15
CBL-M-PWR-RA-US
CBL-M-PWR-RA-TWLK-US
CBL-M-PWR-RA-UK
Chapter 1: Overview
Figure 13 on page 50 depicts the plug on
Electrical
Specification Plug Type
240 VAC, 50 Hz AC SAA/3/15
220 VAC, 50 Hz AC CH2-16P
220 or 230 VAC, 50 Hz CEE 7/7
AC
230 VAC, 50 Hz AC CEI 23-16/VII
125 VAC, 50 or 60 Hz JIS 8303
AC
220 VAC, 50 or 60 Hz NEMA L6-20P
AC
125 VAC, 60 Hz AC NEMA 5-15P
125 VAC, 60 Hz AC NEMA L5-15P
250 VAC, 60 Hz AC NEMA 6-20
250 VAC, 60 Hz AC NEMA L6-20P
240 VAC, 50 Hz AC BS89/13
49