Installing The Mx480 Air Filter; Figure 90: Removing The Air Filter - Juniper MX480 Hardware Manual

See Also
Copyright © 2019, Juniper Networks, Inc.

Figure 90: Removing the Air Filter

MX480 Cooling System Description on page 41
Troubleshooting the MX480 Cooling System on page 355

Installing the MX480 Air Filter

To install the air filter (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Locate the up arrow and ensure that the air filter is right side up.
2.
Slide the air filter straight into the chassis until it stops.
3.
Align the captive screws of the air filter cover with the mounting holes on the chassis.
4.
Tighten the captive screws on the air filter cover.
5.
Figure 91 on page 236):
Chapter 4: Maintaining Components
235