Lift; Figure 54: Reinstalling A Power Supply - Juniper MX480 Hardware Manual

MX480 Universal Routing Platform Hardware Guide
186

Figure 54: Reinstalling a Power Supply

Reinstalling the Fan Tray After Installing the MX480 Router with a Lift
To reinstall the fan tray (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Grasp the fan tray on each side, and insert it straight into the chassis. Note the correct
2.
orientation by the "this side up" label on the top surface of the fan tray.
Tighten the captive screws on the fan tray faceplate to secure it in the chassis.
3.
Figure 55 on page 187):
Copyright © 2019, Juniper Networks, Inc.