Replacing A Cable On An Mx480 Dpc, Mpc, Mic, Or Pic; Removing A Cable On An Mx480 Dpc, Mpc, Mic, Or Pic; Figure 113: Attaching A Cable To A Dpc - Juniper MX480 Hardware Manual

MX480 Universal Routing Platform Hardware Guide
See Also

Replacing a Cable on an MX480 DPC, MPC, MIC, or PIC

274

Figure 113: Attaching a Cable to a DPC

Preventing Electrostatic Discharge Damage to an MX480 Router on page 388
MX480 Dense Port Concentrator (DPC) Description on page 90
MX480 Dense Port Concentrator (DPC) LEDs on page 95
Troubleshooting the MX480 DPCs on page 356
Removing a Cable on an MX480 DPC, MPC, MIC, or PIC on page 274
1.
Installing a Cable on an MX480 DPC, MPC, MIC, or PIC on page 276
2.

Removing a Cable on an MX480 DPC, MPC, MIC, or PIC

Removing and installing cables on a DPC, MPC, MIC, or PIC does not affect router function.
To remove a cable:
Have ready a rubber safety cap for each fiber-optic cable and transceiver.
1.
If removing all cables connected to the component, use one of the following methods
2.
to take the component offline:
Copyright © 2019, Juniper Networks, Inc.