Troubleshooting The Mx480 Pics - Juniper MX480 Hardware Manual

MX480 Universal Routing Platform Hardware Guide
See Also

Troubleshooting the MX480 PICs

Problem
Solution
362
Uptime:
Max Power Consumption
Slot 2 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 3 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 4 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
For further description of the output from the commands, see the Junos OS
Administration Library.
MX480 Modular Port Concentrator (MPC) Description on page 124
Maintaining MX480 MPCs on page 295
Replacing an MX480 MPC on page 298
Description: The PICs are not functioning normally.
Check the status of each port on a PIC by looking at the LED located on the PIC
faceplate. For information about the meaning of LED states on different PICs, see the
MX Series Interface Module Reference
Check the status of a PIC by issuing the
PIC slots in the FPC are numbered from
6 days, 3 hours, 8 minutes, 51 seconds
365 Watts
Online
41 degrees C / 105 degrees F
1024 MB
128 MB
2048 MB
2009-12-22 12:26:46 PST
6 days, 3 hours, 8 minutes, 59 seconds
265 Watts
Online
36 degrees C / 96 degrees F
2048 MB
806 MB
2632 MB
2009-12-22 12:27:04 PST
6 days, 3 hours, 8 minutes, 41 seconds
450 Watts
Online
40 degrees C / 104 degrees F
2048 MB
1324 MB
5120 MB
2009-12-22 12:27:02 PST
6 days, 3 hours, 8 minutes, 43 seconds
440 Watts
.
show chassis fpc pic-status
0 through 1 , left to right:
Copyright © 2019, Juniper Networks, Inc.
CLI command. The