Installing The Mx480 Fan Tray; Figure 92: Removing The Fan Tray - Juniper MX480 Hardware Manual

Copyright © 2019, Juniper Networks, Inc.

Figure 92: Removing the Fan Tray

Installing the MX480 Fan Tray

To install the fan tray (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Grasp the fan tray handle, and insert it straight into the chassis. Note the correct
2.
orientation by the
this side up
Tighten the captive screws on the fan tray faceplate to secure it in the chassis.
3.
Figure 93 on page 240):
label on the top surface of the fan tray.
Chapter 4: Maintaining Components
239