Installing The Mx480 Router Cable Management Bracket; Figure 69: Reinstalling An Fpc - Juniper MX480 Hardware Manual

MX480 Universal Routing Platform Hardware Guide

Installing the MX480 Router Cable Management Bracket

202

Figure 69: Reinstalling an FPC

The cable management brackets attach to both sides of the router. To install the cable
management brackets (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Position the cable management brackets on the front sides of the chassis.
2.
Insert the tabs into the slots.
3.
Tighten the captive screws completely.
4.
Figure 70 on page 203):
M X4 80
Copyright © 2019, Juniper Networks, Inc.