About the Documentation
Documentation and Release Notes
Using the Examples in This Manual
Copyright © 2019, Juniper Networks, Inc.
Documentation and Release Notes on page xxiii
Using the Examples in This Manual on page xxiii
Documentation Conventions on page xxv
Documentation Feedback on page xxvii
Requesting Technical Support on page xxvii
To obtain the most current version of all Juniper Networks
see the product documentation page on the Juniper Networks website at
https://www.juniper.net/documentation/
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at
https://www.juniper.net/books
If you want to use the examples in this manual, you can use the
command. These commands cause the software to merge the incoming
merge relative
configuration into the current candidate configuration. The example does not become
active until you commit the candidate configuration.
If the example configuration contains the top level of the hierarchy (or multiple
hierarchies), the example is a full example. In this case, use the
If the example configuration does not start at the top level of the hierarchy, the example
is a snippet. In this case, use the
described in the following sections.
®
.
.
load merge relative
command. These procedures are
technical documentation,
load merge
or the
load
command.
load merge
xxiii