Figure 63: Removing An Fpc - Juniper MX480 Hardware Manual

Chapter 3: Initial Installation and Configuration
CAUTION: The weight of the FPC is concentrated in the back end. Be
prepared to accept the full weight—up to 18 lb (8.2 kg)—as you slide the
FPC out of the chassis.
When the FPC is out of the chassis, do not hold it by the ejector handles,
bus bars, or edge connectors. They cannot support its weight.

Figure 63: Removing an FPC

M X4 80
Copyright © 2019, Juniper Networks, Inc. 195