Rj-45 Connector Pinouts For Mx Series Routing Engine Aux And Console Ports; Table 90: Rj-45 Connector Pinout For The Routing Engine Ethernet Port; Table 91: Rj-45 Connector Pinout For The Aux And Console Ports - Juniper MX480 Hardware Manual

RJ-45 Connector Pinouts for MX Series Routing Engine AUX and CONSOLE Ports

Copyright © 2019, Juniper Networks, Inc.

Table 90: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port

Pin Signal
1 TX+
2 TX–
3 RX+
4 Termination network
5 Termination network
6 RX–
7 Termination network
8 Termination network
The ports on the Routing Engine labeled
interfaces that accept an RJ-45 connector. The ports connect the Routing Engine to an
auxiliary or console management device.
connector pinout.

Table 91: RJ-45 Connector Pinout for the AUX and CONSOLE Ports

Pin Signal
1 RTS
2 DTR
3 TXD
4 Ground
5 Ground
6 RXD
7 DSR/DCD
8 CTS
Chapter 2: Site Planning, Preparation, and Specifications
and are asynchronous serial
AUX CONSOLE
Table 91 on page 167 describes the RJ-45
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
167