Installing An Mx480 As Msc; Figure 132: Removing An As Msc - Juniper MX480 Hardware Manual

MX480 Universal Routing Platform Hardware Guide
See Also
312
Slide the AS MSC out of the AS MLC card carrier by pulling the handles, and place it
4.
in the electrostatic bag or on the antistatic mat.
If you are not reinstalling an AS MSC into the emptied AS MSC slot within a short time,
5.
install a blank AS MSC panel over the slot to maintain proper airflow in the AS MLC
card cage.

Figure 132: Removing an AS MSC

MX480 Application Services Modular Storage Card Description on page 132

Installing an MX480 AS MSC

To install an AS MSC (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Align the notches in the connector at the rear of the AS MSC with the notches in the
2.
AS MSC slot (slot 0 —the top slot in the AS MLC ), and then slide the AS MSC in until
it lodges firmly in the AS MLC.
Figure 133 on page 313):
Copyright © 2019, Juniper Networks, Inc.