Re-S-X6-64G Routing Engine Leds; Figure 26: Re-S-X6-64G Routing Engine Leds; Table 27: Re-S-X6-64G Routing Engine Leds - Juniper MX480 Hardware Manual

RE-S-X6-64G Routing Engine LEDs

Table 27: RE-S-X6-64G Routing Engine LEDs

Label Color
Green
ONLINE
-
Green
DISK1
-
DISK2 Green
-
Green
OK/FAIL
Yellow
MASTER Blue
See Also
Copyright © 2019, Juniper Networks, Inc.
Upgrading to the RE-S-X6-64G Routing Engine in a Nonredundant Host Subsystem
on page 261
Each Routing Engine has five LEDs that indicate its status. The LEDs—labeled
DISK1 , DISK2 , ONLINE , and
Table 27 on page 69 describes the functions of the Routing Engine LEDs.

Figure 26: RE-S-X6-64G Routing Engine LEDs

1— ONLINE
LED
2— OK/FAIL
LED
3— DISK1
LED
State
Blinking slowly
Blinking rapidly
Off
Blinking
Off
Blinking
Off
On steadily
On steadily
On steadily
MX240 Routing Engine Description
OK/FAIL —are located on the faceplate of the Routing Engine.
4— DISK2
5— ONLINE/OFFLINE
6— MASTER
Description
Routing Engine is in the process of booting BIOS, and the host
OS.
Routing Engine is in the process of booting Junos OS.
Routing Engine is not online or not functioning normally.
Indicates presence of disk activity.
There is no disk activity.
Indicates presence of disk activity.
There is no disk activity.
Routing Engine is powering up.
Routing Engine is not powering up, which indicates failure.
This Routing Engine is the Master Routing Engine.
Chapter 1: Overview
MASTER
LED
button
LED
,
69