Rep 8.13 Media Feed Drive Belt - Xerox 8830 Service Manual

REP 8.13 Media Feed Drive Belt

Parts List on PL 8.1
WARNING
Switch off the Main Power Switch. Disconnect the
Power Cord.
Removal
1. Latch the Xerographic Module at the Service
Position (REP 9.2).
2. Remove the Media Transport Assembly (REP
8.1).
3. Remove the Fabric Guide (REP 8.9).
4. Remove the Pressure Plates (REP 8.5).
5. Turn the Media Transport Assembly over.
6. (Figure 1): Remove the Media Feed Drive Belt.
8830
Replacement
1. Ensure that the belt is over the Idler Pulley.
Remove the Motor
Assembly
Figure 1. Removing the Media Feed Drive Belt
1/98
4-37
Remove the Media
Feed Drive Belt
Idler Pulley
R2448
REP 8.13