Leds - ZyXEL Communications XS3800-28 User Manual

Disconnecting the Power
The power input connectors can be disconnected from the power source individually.
Disconnect the power cord from the power outlet.
1
Disconnect the power cord from the AC power socket.
2

3.3 LEDs

The following table describes the LEDs.
Table 6 LEDs
LED
PWR1
PWR2
SYS (System)
Chapter 3 Hardware Panels
COLOR STATUS DESCRIPTION
Green On The Switch is receiving power from the power module in the first power
slot.
Blinking The Switch is returning to the last-saved custom default configuration
settings.
Amber On The Switch is returning to its factory default configuration settings.
Blinking The PWR1 LED will blink in amber in the following situations:
•
•
Off The Switch is not receiving power from the power module in the first
power slot.
Green On The Switch is receiving power from the power module in the second
power slot.
Blinking The Switch is returning to the last-saved custom default configuration
settings.
Amber On The Switch is returning to its factory default configuration settings.
Blinking The PWR2 LED will blink in amber in the following situations:
•
•
Off The Switch is not receiving power from the power module in the second
power slot.
Green On The Switch is on and functioning properly.
Blinking The Switch is rebooting and performing self-diagnostic tests.
Red On The Switch is functioning abnormally.
Off The power is off or the system is not ready or malfunctioning.
XS3800-28 User's Guide
The Switch detected a power supply failure with the power cable
connected to the Switch and a power source.
The fans are not functioning at a proper speed or malfunctioning.
The Switch detected a power supply failure with the power cable
connected to the Switch and a power source.
The fans are not functioning at a proper speed or malfunctioning.
52