ZyXEL Communications XS3800-28 User Manual page 140

Figure 91 MONITOR > System Information (Stacking Mode)
The following table describes the labels in this screen.
Table 37 MONITOR > System Information
LABEL DESCRIPTION
System Information
System This displays the descriptive name of the Switch for identification purposes.
Name
Product This displays the product model of the Switch. Use this information when searching for firmware
Model
upgrade or looking for other support information in the website.
ZyNOS F/W This displays the version number of the Switch 's current firmware including the date created.
Version
Ethernet This refers to the Ethernet MAC (Media Access Control) address of the Switch.
Address
CPU This displays the current percentage of CPU utilization.
Utilization
Current (%)
Memory Utilization
Memory utilization shows how much DRAM memory is available and in use. It also displays the current percentage
of memory utilization.
Name This displays the name of the memory pool.
Total (byte) This displays the total number of bytes in this memory pool.
Used (byte) This displays the number of bytes being used in this memory pool.
Utilization This displays the percentage (%) of memory being used in this memory pool.
(%)
Hardware Monitor (Standalone Mode)
Temperature The Switch has temperature sensors that are capable of detecting and reporting if the
Unit temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
Temperature CPU/MAC, BOARD, and PHY refer to the location of the temperature sensor on the Switch printed
(C/F) circuit board.
Chapter 17 System Information
XS3800-28 User's Guide
140