Zuld Setup - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Table 119 PORT > ZULD > ZULD Status (continued)

Remote MAC Addr

38.3 ZULD Setup

Use this screen to enable ZULD on a port, configure a mode and set the probe time. To open this screen,

click PORT > ZULD > ZULD Setup.

Figure 192 PORT > ZULD > ZULD Setup (Standalone Mode)

Chapter 38 ZULD

This is the MAC address of the port on the connected device to which the port of the

Switch is connected.

This is the port number of the port on the connected device to which the port of the Switch

is connected.

XS3800-28 User's Guide