Dhcpv6 Server Information; Add/Edit Dhcpv6 Server Information - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

64.11 DHCPv6 Server Information

Use this screen to view and configure DHCPv6 and DNS server settings on the Switch. Click NETWORKING

> DHCP > DHCPv6 Server > DHCPv6 Server Information to display the screen as shown.

Figure 380 NETWORKING > DHCP > DHCPv6 Server > DHCPv6 Server Information

The following table describes the labels in this screen.

Table 253 NETWORKING > DHCP > DHCPv6 Server > DHCPv6 Server Information

Refresh Time

Use this screen to add/edit DHCPv6 and DNS server settings on the Switch. Click Add/Edit, or select an

entry and click Add/Edit in the NETWORKING > DHCP > DHCPv6 Server > DHCPv6 Server Information to

display this screen.

Figure 381 NETWORKING > DHCP > DHCPv6 Server > DHCPv6 Server Information > Add/Edit

Chapter 64 DHCP

This field displays a sequential number for each entry.

This field displays whether the entry is activated or not.

This field displays the ID number of the VLAN to which the DHCPv6 server belongs.

This field displays the number of seconds a DHCPv6 client should wait before refreshing

information retrieved from a DHCPv6 server. It displays disable if Refresh Time is not configured.

This field displays the IPv6 address of the DNS server that the DHCP clients will use. It displays

disable when it is not configured.

Select an entry's check box to select a specific entry. Otherwise, select the check box in the

table heading row to select all entries.

Click Add/Edit to add a new entry or edit a selected one.

Click Delete to remove the selected entries.

XS3800-28 User's Guide