ZyXEL Communications XS3800-28 User Manual page 310

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Figure 223 SWITCHING > Multicast > IPv4 Multicast > IGMP Snooping (Stacking Mode)

The following table describes the labels in this screen.

Table 134 SWITCHING > Multicast > IPv4 Multicast > IGMP Snooping

Enable the switch button to enable IGMP Snooping to forward group multicast traffic only to

ports that are members of that group.

Select this to allow the Switch to send IGMP General Query messages to the VLANs with the

multicast hosts attached.

Querier Version

IGMP snooping query works only when both host and Switch support the same IGMP version.

Select v2 to allow the Switch to send IGMPv2 queries only.

Select v3 to allow the Switch to send IGMPv3 queries only.

Chapter 44 Multicast

XS3800-28 User's Guide

Troubleshooting