Lldp-Med Location; Add/Edit Lldp-Med Location - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

35.10 LLDP-MED Location

Click PORT > LLDP > LLDP MED > LLDP-MED Location to display the screen as shown next.

Figure 177 PORT > LLDP > LLDP MED > LLDP-MED Location

The following table describes the labels in this screen.

Table 112 PORT > LLDP > LLDP MED > LLDP-MED Location

Civic Address

To access this screen, click the Add/Edit button or select an entry from the list and click the Add/Edit

Chapter 35 Link Layer Discovery Protocol (LLDP)

This lists the index number of the location configuration. Click an index number to view or edit

the location.

This lists the port number of the location configuration. In Stacking mode, the first number

represents the slot and the second the port number.

This field displays the location configuration information based on geographical coordinates

that includes longitude, latitude, altitude and datum.

This field displays the Civic Address for the remote device using information such as Country,

State, County, City, Street, Number, ZIP code and additional information.

This field shows the Emergency Location Identification Number (ELIN), which is used to

identify endpoint devices when they issue emergency call services. The valid length is form

10 to 25 characters.

Select an entry's check box to select a specific entry. Otherwise, select the check box in the

table heading row to select all entries.

Click Add/Edit to add a new location or edit a selected one.

Select the locations that you want to remove, then click Delete.

XS3800-28 User's Guide