Edit Dhcpv6 Client - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Figure 124 SYSTEM > IPv6 > DHCPv6 Client Setup

The following table describes the labels in this screen.

Table 67 SYSTEM > IPv6 > DHCPv6 Client Setup

Rapid-Commit

24.11.1 Edit DHCPv6 Client

Use this screen to configure the Switch's DHCP settings when it is acting as a DHCPv6 client. Select an

entry and click Edit in the SYSTEM > IPv6 > DHCPv6 Client Setup screen to display this screen.

Figure 125 SYSTEM > IPv6 > DHCPv6 Client Setup > Edit

Chapter 24 IPv6

This is the interface index number.

This is the name of the IPv6 interface you created.

This field displays whether the Switch obtains a non-temporary IP address from the DHCPv6 server.

This field displays whether the Switch obtains information from the DHCPv6 server by a rapid two-

message exchange.

This field displays whether the Switch obtains DNS server IPv6 addresses from the DHCPv6 server.

This field displays whether the Switch obtains a list of domain names from the DHCP server.

This field displays the time interval (in seconds) at which the Switch exchanges other configuration

information with a DHCPv6 server again.

Select an entry's check box to select a specific entry.

Click Edit to edit the selected entry.

XS3800-28 User's Guide