Add/Edit Mvr Group - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Figure 243 SWITCHING > Multicast > MVR > Group Setup

The following table describes the labels in this screen.

Table 151 SWITCHING > Multicast > MVR > Group Setup

Start Address

44.13.1 Add/Edit MVR Group

Use this screen to configure MVR IP multicast group addresses. To access this screen, click the Add/Edit

button or select an entry from the list and click the Add/Edit button.

Figure 244 SWITCHING > Multicast > MVR > Group Setup > Add/Edit

Chapter 44 Multicast

This field displays the multicast VLAN ID.

This field displays the descriptive name for this setting.

This field displays the starting IP address of the multicast group.

This field displays the ending IP address of the multicast group.

Select an entry's check box to select a specific entry. Otherwise, select the check box in the

table heading row to select all entries.

Click Add/Edit to add a new multicast group or edit a selected one.

Select the group entries that you want to remove, then click Delete to delete the selected

multicast groups.

If you delete a multicast VLAN, all multicast groups in this VLAN will also be removed.

XS3800-28 User's Guide