ZyXEL Communications XS3800-28 User Manual page 124

Figure 78 MONITOR > Neighbor > Neighbor Details (Stacking Mode)
The following table describes the fields in the above screen.
Table 28 MONITOR > Neighbor > Neighbor Details
LABEL DESCRIPTION
Search Ports... Enter the port number to search and display the ports you specified. The result will display
in the below list.
You can enter multiple ports separated by comma (",") or hyphen ("-") for a range. For
example, enter "3-5" for ports 3, 4, and 5. Enter "3,5,7" for ports 3, 5, and 7.
In Stacking mode, the first number represents the slot and the second the port number.
Enter "1/1-1/24,2/23" for ports 1 to 24 for the Switch in slot 1 and port 23 for the Switch in
slot 2, for example.
SLOT This field appears only in Stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
Port This shows the port of the Switch, on which the neighboring device is discovered.
Desc. This shows the port description of the Switch.
Link Speed This shows the speed (either 10M for 10 Mbps, 100M for 100 Mbps, 1G for 1 Gbps, 2.5G for
2.5 Gbps, 5G for 5 Gbps, or 10G for 10 Gbps) and the duplex (F for full duplex or H for
half). This field displays Down if the port is not connected to any device.
Remote
System Name This shows the system name of the neighbor device.
Chapter 13 Neighbor
XS3800-28 User's Guide
124